The direct coating lines are very versatile due to their simplicity of use and wide possibility of settings. These lines are used to apply the chemical/substance directly onto the fabric or non-fabric sheet.
The Pre-preg finishing is a pre-impregnation process using fibrous reinforcement and a polymer matrix. It is a treatment aimed at optimizing thickness, stabilizing the resin, and applying protective films to facilitate storage and subsequent industrial...
The Coating Head mod. BSK is used for coating on fabric, paper and TNT (resin and adhesives and lacquers). The features of the machine are: – Ease of implementation: the bench can be installed at the entrance of a common textile tenter – Optimal control...
The Coating Head mod. BSR-T has been designed and built so that different coating techniques can be employed. Machine is suitable for: Full cover coating over blanket Full cover coating by floating blade The following are some of the advantages that this machine...
The Combination Bench mod. BSR/SLOT is designed to be able to use various coating techniques. The advantages offered by the machine are:– Ease of implementation: the bench can be installed at the entrance of a common coppery, textile/faux leather oven or for...
The coating system for fabric pre-treatment for digital printing, consists of doctor-blade coating on a fabric to increase the printing quality digitally done. Coating takes place directly at the inlet of the printing line. The fabric is then pre-dried and fed onto...
The Coating Machine mod. BSR/C is used to coat on paper (with resin and/or adhesives). The machine’s features are: Easy implementation: the coating machine can be placed at the inlet of a common oven Maximum control over compound quantity; process reproducibility is...
The Powder Distribution Unit mod. TDP/M consists of one hopper containing powder, with an inverter-controlled dosing cylinder of adjustable speeds placed at its base. A doctor blade opposed to the cylinder is used to adjust powder output. A rotating brush is mounted...
The Laboratory Oven & Direct Coating Head mod. JP consists of: – An oven with electric batteries that can operate with different heating modes such as static heating, low ventilation heating, upper side heating and lower side heating (or both sides...
The Calendering Unit mod. GG/IR can operate with hot or cold calendering roll. It consists of: – Two heavy duty and steady machine shoulders which carry all the machine elements – Counter roller covered with hard neoprene rubber – Hard chromed ground...
Features of the Stenter mod. RAM/F: Heating system; equipped with a circulation fan, a battery, oil related blowers, channel recovery and a filter. To ensure uniform heating and air distribution, the fields are opposing right/left. In order to reduce the electrical...
The Coating Machine mod. BSR/R is used to coat fabric, paper and TNT (with resin and adhesives). The machine’ features are: – Easy implementation: the coating machine can be placed at the inlet of a common stenter/oven – Maximum control over compound...
The Coating Head mod. BS2/M has been designed and built so that different coating techniques can be employed. The following are some of the advantages the machine has to offer: – Easy implementation: the coating head can be placed at the inlet of a common...
The Coating Machine mod. BSR/M is used to coat fabric (with resin and adhesives). The unit can be used for air-coating, coating on cylinder, and coating on photo-engraved cylinder. The machine’s features include: – Easy implementation: the coating...
The Coating Head mod. BS2 has been designed and built so that different coating techniques can be employed. The following are some of the advantages that this machine has to offer: – Easy implementation: the coating head can be placed at the inlet of a common...
The Rotary Screen Coater mod. BS1/T is used to coat and print fabric (with pigments, resin and adhesives), and for pattern flocking. The machine’s main features are: – Rotary screen pneumatic lifting – Removable paste feeding pipe with doctor...
The Rotary Screen Coater mod. BS1 is used to coat and print fabric (with pigments, resin and adhesives) and for pattern flocking. The machine’s main features are: – Rotary screen pneumatic lifting – Removable internal paste feeding pipe – Manual...
The Coating Head mod. BS has been designed and built to coat using machinery that can be easily implemented. The following are some of the advantages that come with this machine: – The machine can be placed at the inlet of a common stenter, occupying minimum...
The Coating Machine mod. BSR/F is used to coat fabric (with resin and/or adhesives). The machine’s features are: – Easy implementation: the coating machine can be placed at the inlet of a common stenter – Maximum control over compound quantity; process...
