AIGLE’s machines are designed to flock fabrics, paper rolls, thermoformed polystyrene, etc. (for a variety of different widths)
AIGLE manufactures Flocking machines in both DC and AC versions.
The DC version is the most popular.
The AC version is particularly popular in North America. With the AC system it’s possible to obtain a higher flocking speed. An AC electric device consisting of a set of special electrodes mounted on an insulated frame is located below each group of flocking hoppers. The AC system is normally used in the manufacturing of upholstery fabrics.
The Flocking Machine mod. FR6 consists of three base modules, each one consisting of: Two electrostatic hoppers with two multi-row rotating brushes. Each brush is opposed to a stainless steel screen. Rotation speed and pressure are both adjustable. The screen can...
The Flocking Machine mod. FR2 consists of: – Two electrostatic hoppers with two multi-row rotating brushes. Each brush is opposed to a stainless steel screen. Rotation speed and pressure are both adjustable and the screen can easily be removed – A lifting...
The Blowing/Embossing Machine mod. AP1 is used to emboss flocked fabric. It must be placed between the flocking unit and the oven in order that it operates while the adhesive is still wet. The embossing effect is obtained by blowing air through rotary screen...
The Brushing Unit mod. SZ2 consists of: – Two rotating brushes with a “beater-bar” effect that is opposed to the flocked fabric and with adjustable pressure. Brushes are sealed inside the suction chambers, in order to avoid flock...
The Flocking Trolley mod. TCR/COMPL has to be assembled on the end shoulders of a flat screen printing machine. The flocking trolley runs back and forth on two rails mounted on the printing machine’s shoulders. The trolley and printing machine speeds are...
The system is composed of one or more Flocking Units that can be mounted on the stations of any flat screen printing line. Each flocking unit is loaded with flock of a different colour. As the fabric stops in between printing phases, the units flock the...
The Flocking Unit for Rotary Printing mod. TC2/COMPL is placed on the shoulders of a rotary screen printing machine. At the point where fabric and conveyor belt split, a suction blade for preliminary cleaning is located; final cleaning is performed by the...
The Glitter Distribution Unit mod. TDP consists of one hopper containing glitter, with an inverter controlled dosing cylinder of adjustable speed placed at its base. A doctor blade opposed to the cylinder is used to adjust the glitter output. A rotating brush is...
Infrared Pre-Drying Oven has been designed for different purposes: – Pre-drying: can easily be mounted between the two heads of any rotary printing machine. It can be joined with units of flocking and/or distribution glitters. The oven allows the pre-drying of...
The Ribbons Flocking Line mod. LFN consists of: – Ribbon unwinder – Flat screen printing machine – Flocking machine with longitudinal hopper and flock recovery system – Electric oven – Ribbon rewinder
The Laboratory Flocking Line mod. LFL consists of: – A trolley supporting frame for all machine elements. – One hopper with variable speed, a motorized rotating brush with an adjustable through inverter. A handwheel is provided for height...
